Sunday, April 8, 2012
AIRCRAFT EVACUATON -Planned and Unplanned
Srinivas Rao | 12:16 AM |
AIRCRAFT EVACUATION
|
PLANNED EVACUATION
|
procedures
|
UNPLANNED EVACUATION
Saturday, April 7, 2012
REFERENTIAL COMMUNICATION
To communicate referentially is
to speak so that others will understand and to listen so that you will
understand others or know when you have not. People at all levels can be poor
referential communicators, depending in part the complexity of variables that
enters into the communication situations.
A scientist, for example, may be
unable to communicate successfully with a layperson about a “quark” because of
the difficulty of the subject matter and difference in vocabulary between the
two people.
Referential communication skills
involve the ability to provide and understand specific information. These
skills are important in cockpit environment to give directions, explanations and
situational briefings. The evolution of standard communication phraseology in
aviation was necessitated from these differences in vocabularies of individuals
engaged in a complex activity. In a rapidly changing environment, it is also
necessary that crew is able to communicate effectively, succinctly and without
ambiguity. Be it routine procedures, emergency handling or a high stress situation
like evacuation, clear and unambiguous communication is essential.
Thursday, April 5, 2012
BRIEFING FOR GO-AROUND
wikipedia |
This is ideally carried out prior to top of descent along with approach briefing preparation. In addition to briefing the specifics for the go-around procedure, it's an opportunity to touch upon the level of automation being used for the approach and the task sharing thereof.This will help increase the crew awareness level with respect to the various automation modes being used.
It is also recommended by airbus as deemed practical to briefly recall the main key points of go-around and missed approach when on the final approach or after completing landing checks. Crew also shall be go-around minded all along the final approach phase and landing and avoid falling into the trap of being indecisive and not asserting to go-around.
Operators could further specify a set of conditions/situations wherein it could be recommended to crew to initiate a go-around as a policy to help crew take a step forward to be more assertive and decisive.
Do you know of your operator or others who have gone down this path??? Kindly comment below and let us know what you think of this.
Labels:
AUTOMATION,
BRIEFING,
GO-AROUND,
procedures,
TASK SHARING
Tuesday, April 3, 2012
WORKLOAD MANAGEMENT BY FLIGHT CREW
Srinivas Rao | 12:06 AM |
CRM
|
FLIGHT CREW
|
LANDING
|
procedures
|
TASK SHARING
|
WORKLOAD MANAGEMENT
Key to conducting a flight efficiently and safely is to effectively manage the workload one is faced with during different phases of the flight.
Flight crew workload is typically shared between a Captain and a First Officer.Whilst one takes up the mantle of pilot flying, the other crew carry out the pilot not flying/ pilot monitoring duties.
Workload management is regulated within the frame work of operations by promulgating standard operating procedures, task sharing principles,time management and so on.
Workload is the highest for flight crew during preflight, taxi out, take off and climb to cruise level, before top of descent, during descent, approach, landing and taxi in to bay.
Procedures detailed ensure that they clearly define various tasks carried out during these times and by whom it is executed to regulate the workload and lessen the burden.
Not withstanding the above, during emergency and multiple emergency situations, despite the crew being trained in handling situations in various scenarios, one is faced at times with situations wherein the crew need to dig deep and face occasionaly tremendous increase in their workload, also termed as task saturation. Only way to manage highly increased loads is to prioritise the tasks, work with fellow crew,share the work load and seek similar assistance from cabin crew, ground control and others , to manage the emergency to ensure a safe landing.
Workload management forms part of Crew resource management(CRM) training and equips one with dealing in situations which he hasn't dealt before.
Labels:
CRM,
FLIGHT CREW,
LANDING,
procedures,
TASK SHARING,
WORKLOAD MANAGEMENT
Sunday, April 1, 2012
Subscribe to:
Posts (Atom)